ST-36 Acousto-Optic Alarm Type Electrostatic Releaser for Hu

author：http://yw.stickon.com.cn/ date：2022-04-02 browse ：101

ST-36 Acousto-Optic Alarm Type Electrostatic Releaser for Human Body
 
 
 
Product Overview
 
ST-36 acousto-optic alarm explosion-proof human electrostatic discharger is an instrument for human electrostatic
 
discharge in inflammable, explosive and anti-static places. It is characterized by reasonable design of human
 
electrostatic discharge resistor, reasonable and effective control of human electrostatic discharge, prolonged
 
human electrostatic discharge time, reduced instantaneous human electrostatic discharge energy, and enabled
 
human electrostatic discharge safely.
 
Product Features
 
1. Ultra-low power design, no need to replace the battery during normal use
 
2. Touch sensing, no mechanical moving parts
 
3. Integral epoxy resin seal, anti-corrosion, waterproof and moisture-proof
 
4. Explosion-proof touch ball, safely release static electricity, human contact does not produce electric shock
 
5. Acousto-optic alarm indicates that the contact between human body and explosion-proof touch ball is reliable
 
and static electricity is released
 
6. The grounding wire is independently tested, and the grounding resistance meets the standard to ensure reliable
 
grounding
 
Working Status Indication
 
State 1: Sleeping state When the human body is not in contact with the touch ball, the human static discharge
 
alarm is in a sleeping state, the status indicator light is not on, and the buzzer does not alarm.
 
State 2: Static Discharge When the human body comes into contact with the touch ball, it triggers the human body
 
 static discharge alarm to work, the buzzer alarms and the red light flashes. Static electricity is being discharged at
 
this time, please keep it for 3-5 seconds.
 
State 3: After the static electricity is released, if the buzzer doesn't give an alarm and the green light flashes after
 
3-5 seconds of reliable contact between the human body and the touch ball, it means that the static electricity has
 
 been released normally and you can enter the work area for operation.
 
State 4: Alarm state When the human body makes reliable contact with the touch ball, if the buzzer gives an alarm
 
and the yellow light flashes, it means that the human static electricity release alarm is in alarm state, and the
 
human static electricity cannot be effectively released. Please check the grounding wire.
 
Technical Parameter
 

Touch ball diameter	90mm
Steel pipe diameter	48mm
Product height	1000mm
Steel pipe wall thickness	1.0mm
Grounding cable	3m
Base diameter	140mm

 
 
Electrical Parameters

Operating voltage	3.6V lithium battery
Alarm resistance	< 60Ω
Groundingresistance requirements	< 100Ω
Explosion proof sign	ExibllCT4
Working temperature	-40°C~+60°C
Withstand static voltage	±20KV
Alarm mode	Sound and light alarm

 
Reference standard: The design of ST-36 human electrostatic discharge alarm refers to the following national
 
 standards: GB12158-2006 General Guidelines for Preventing Electrostatic Accidents, GB50074-2002 Code for
 
Design of Oil Depot, SH3097-2000, Code for Design of Electrostatic Grounding in Petrochemical Industry
 
Installation Guidelines
 
1. Erection of uprights
 
 
2. Grounding wire installation
 
The grounding wire and the grounding pile are connected by M8 bolts, and the two copper noses are connected
 
separately (as shown below)