ST106H is a thin, lightweight, wide-type air ionizer with a wide range of electrostatic removal. The company's unique HDC-AC air ionizer is easy to maintain with fewer time variation and longer maintenance intervals.
Features:
1. Using HDC-AC corona discharge, it can play a stable performance of removing static electricity for a long time.
2. The appearance of resin, and our traditional products, compared with the realization of lightweight, thin.
3. Using six 120mm fan motors, the air volume (continuously variable) is large, and can remove static electricity at high speed.
4. Discharge window, discharge needle components can be loaded and unloaded with a single touch, improving the maintenance.
5. High-voltage output abnormality, LED indication and abnormal output notification.
6. The main body angle locking mechanism to ensure that the main body in the vibration and other external causes, the angle will not change.
7. Sticky Technology self-developed chip technology, the use of the chip instantly stop working, to achieve the effect of automatic cleaning of the discharge needle dust.
Technical Parameters
Model | ST106H |
Input power | DC24V (with AC adapter, supports AC100-240V) |
Capacity | 60VA |
Input voltage | ±7500V |
Ion balance | ±5V or less (distance 300mm, when shipped from the factory) |
Static elimination time | Less than 1.0 seconds (distance 300mm, maximum air volume, when leaving the factory) |
Wind speed | 1.7~3.3m/sec(distance 300mm center) |
Air volume | 1.4~3.6m³/min*6 |
Ozone generation amount | 0.004ppm or less (distance 150mm) |
Working environment | 0~40℃/15~85%RH (no condensation) |
Filter | Pre-filter stage |
Output signal |
MOS FET relay, voltage-free contact output (NC output) (OFF in case of high voltage abnormality or fan abnormality) |
Body size | 1090*190.5*78.5mm(W*H*D) does not include protruding parts |
Weight | About 4.8kg(including bracket) |
Material | Body: ABS Discharge needle: Tungsten Base: SECC |
Noise | 69DB(A)(distance 1m) |
Accessories | Instruction manual,、AC adapter,、Bracket (2) Knob (2)、lead wires for output signal connection (2 pcs/set) |
Optional accessories | Discharge needle assembly, filter ,expansion air vent window |
Number | Designation | Indicate | Typology | Descriptive |
① | Power indicator light | POWER | Green Indicator Light | Lights up when the power is turned on。 |
② | Run indicator light | RUN | Green Indicator Light | Lights up when operating the product. |
③ | Fan Speed Adjustment Screw | FAN ADJ. | Screw | Realization of infinitely adjustable airflow change |
④ | Airflow indicator light | FAN SPEED | Green Indicator Light | Fan airflow can be adjusted in 5 steps. |
⑤ | Pulse discharge detection indicator | P.D. | Red Indicator Light | Lights up when discharge or spark occurs and high voltage output stops. |
⑥ | Over-current detection indicator | O.C. | Red Indicator Light | Lights up when overcurrent occurs and high voltage output stops. |
‡ | Fan lock detection indicator | FAN LOCK | Red Indicator Light | Lights up when the fan is not in normal operation. |