ST-202CY
Infrared Induction Ion Air Snake Nozzle
Product Features:
1. Inductive ion nozzle controls air flow through photoelectric switch. The sensing distance is adjustable. When no object passes through the nozzle, the sensing switch will automatically turn off the compressed gas, reducing unnecessary waste of compressed gas and noise
2. The inductive ion air nozzle can be matched with a foot switch to control compressed air, which can adjust the direction universally and is convenient to use.
3. Ion nozzle is equipped with photoelectric induction control; Its unique photoelectric induction automatic air outlet
4. When the distance between the object and the ion nozzle is 300MM (the distance can be adjusted in the range of 10-30CM), the ion nozzle will start immediately
5. Strong and adjustable air volume can immediately remove stubborn dust particles on the surface of objects, and at the same time, it can well eliminate static electricity on the surface of objects
6. Stickon ST401A high-voltage generator is required for integrated use
|
High voltage generator is required: ST401A one tow two/one tow four  |
|
|
Model Parameters |
ST401A |
| Operating power supply | 110V/60Hz or 220V/50Hz |
| Consumption current | 0.23A or 0.12A |
| Power | 75W |
| Operating temperature range | 0-50℃ |
| Weight | 2.25kg |
| Length of high voltage wire | 1.5m |
| Output voltage | 4.6KV X 2 or 4 |
| Output current | 4.5mA |
| Can it be used in explosion-proof environment | No |
| Model | ST202CY |
| Ion generation mode | Ac type |
| Material of discharge needle | Tungsten steel |
| Host material | Stainless steel/ABS fireproof engineering plastics |
| Air ion supply range | 8cm~15cm |
| Air inlet pipe | Duct with inner diameter Φ 8 |
| Body size | 550mm (L)×30mm (W)×80mm (H) Standard cable length 2.5M |
| Accessories | Instructions/warranty cards/certificates |
| Performance | Static removal time < 1.5S |
| Air consumption | 0.09m³/min |
| Noise | 56DB |
| Ozone production | < 0.02ppm or less (measuring distance 200mm) |
