ST-DC-506A Air Source DC Ion Bar

author：http://yw.stickon.com.cn/ date：2021-07-31 browse ：163

ST-DC-506A
Air Source DC Ion Bar
Built-in type of high voltage power supply equipped with HDC-AC
HDC-AC technology is adopted to realize long-term stability of static electricity removal performance and long-term no cleaning
The time and size of static electricity removal are increased by 30% compared with traditional products!



Main feature

1. Improved performance by 30%
2. Static removal performance is stable for a long time
3. The wear of discharge needle is reduced
4. Ultralow ozone
5. Excellent ion balance characteristics
6. Small flow nozzle
7. Cleaning timer
8. Types of discharge needles
9. Safety function
 
●   The time and size of static electricity removal are increased by 30% (compared with the traditional products of our company)
ST-DC-506A is the successor model of our company's traditional product ST503A. The static electricity removal time is increased by more than 30%, and it is more miniaturized. It is an ionizer with the industry's top static electricity removal performance.
l Small-flow discharge needle nozzle for suppressing air consumption is easy to replace
There are also two kinds of discharge needle nozzles, i.e., normal air consumption nozzles and small flow nozzles which can restrain compressed air consumption. The nozzle can be conveniently replaced.
l The cleaning timer function notifies the cleaning time
When the timer reaches the preset value, the LED lights up to inform that it is time to clean the discharge needle. The time until lighting can be set by the user. (100 to 10000 hours, 9 modes, can also be set to no lights.)
l Ensure safety
Through micro-discharge detection and low-voltage wiring of DC24V input, the use safety is ensured
 
Product standard

★Please inform us of the following models including [electbare length] and [type of discharge needle] when ordering. ST- DC-506A-□□□□-□□ Length and nozzle type l The length is 350 to 3100mm(250mm spacing) l Nozzle flow rate H or L l Material W of discharge needle Example: Tungsten needle with a length of 1850mm and high current discharge: ST-DC- 506A-1850-HW

Length Weight Length Weight 350mm 450g 1850mm 1670g 600mm 650g 2100mm 1880g 850mm 860g 2350mm 2080g 1100mm 1060g 2600mm 2290g 1350mm 1260g 2850mm 2500g 1600mm 1470g 3100mm 2710g

 
Product parameter

Product model	ST-DC-506A
Ion generation mode	Corona discharge mode (HDC-AC)
Input voltage	DC 24V+5V
Power consumption	3.6VA
Output voltage	10kV0-P(0 to peak)
Output when abnormal	No voltage contact output (by normally closed MOSFET relay)
Measure	D29xH92xW350~3100mm
Supply pressure range	Under 0.5Mpa
Ionic equilibrium	≤+-30V (when the air pressure is 0.3Mpa away from 300mm)
Work environment	Ambient temperature: 5~40℃ Ambient humidity: 15%~85% (no condensation) Supply gas: clean and dry air
Attachment	Operating instructions, mounting bracket, power and signal cable (3m), intermediate bracket (over 110mm)

 
Indicator panel



Meaning of each indicator light
POWER: Green LED lights up when the power is turned on normally
RUN: Green LED lights up during normal operation
ALARM: The red LED lights up when micro-discharge occurs in the high-voltage part of the main body such as the discharge needle or overcurrent occurs in the main circuit
CLEANING: When the accumulated running time set with T-SELECT exceeds, the yellow LED lights up until it is released with RESET button
TIMER RESET: This button is used to turn off the CLEANING LED
T-SELECT: This selector is used to set the cumulative continuous time for lighting CLEANING LED
 






Built-In Type of High Voltage Power Supply Equipped With HDC-AC
1. Static Electricity Can Be Removed Uniformly and Stably in the Whole Region

A large amount of positive and negative ions are uniformly supplied in the whole static removing area all the time, and the static removing difference of each area is very small, which is most suitable for electronic equipment requiring fine static removing, etc.
2. Safety Function of Detecting Abnormal Discharge and Spark

It is a safety function of automatically cutting off the applied high voltage after detecting abnormal high voltage discharge such as short circuit of discharge needle of ionizer.
3. Reduce Air Consumption (※ When Using Small Flow L Nozzle)


Schematic diagram of replacing discharge needle

The original nozzle shape greatly reduces the air consumption (60% less than our products).
Support strong and stable static removal. The nozzle structure is designed to be replaceable, detachable.
 
You Can Choose From two Kinds of Nozzles According to the Application:



Options That Support Refreshing Static Removal
l AC adapter for ST101BS: ST101BS-DA (Input voltage AC100V~240V)
l Intermediate bracket: ST101BS-SUSP-A (Standard equipment above 1100)
l Power and signal extension cables: ST101BS-ENC3M (length: 3 m)
l Low flow type l nozzle
Specification of tungsten discharge needlST101BS-NDL-LW01
l High-flow H nozzle
Specification of tungsten discharge needle: ST101BS-NDL-HW01
 
Optional items