Dongguan sidi ke anti - static technology co. LTD 粤ICP备15079615号MODEL 156A Electrified Flat Panel Monitor
Can the ion fan you use meet the requirements and neutralize electrostatic charge quickly and completely? What is the balance of ions produced?
Can you evaluate the performance of ion fans installed in the production line?
Can you record the importance of ion fan monitoring of ion fan efficiently?
Trek-156A charging board tester can make you answer the above questions with confidence, and you can monitor and maintain the ion fan effectively.
l Use Trek-156A to verify whether the new ion fan can meet the actual standard you selected.
l When evaluating the newly installed or in-use ion fan 156A, we can determine whether the decay time and ion balance can meet your actual needs.
l Model 156A is light in structure, easy to carry and easy to maintain ion fan
Model 156A is an important tool to evaluate the performance of ion fans used to neutralize electrostatic charges.
Trek provides optional 156A/1 with computer connection port. This option adds a communication output port and application software which can be used to operate, analyze and store the data of the instrument into the computer.
The Model 156A tests the ion generation efficiency of the ion fan by calculating the time for the ions generated by the ion fan to dissipate the positive and negative voltages on the charging plate.
The Model 156A can also test the balance of generated positive and negative ions, and test the offset voltage caused by the imbalance of positive and negative ions generated by the ion fan on the metal plate.
Typically, with the use of ion fan, the proportion of positive and negative ions produced decreases; Therefore, the time required to neutralize the electrostatic voltage increases, and the balance of positive and negative ions also changes.
It will take too long for the ion fan to completely neutralize the electrostatic voltage generated by the working point; Or the ion wind will charge an otherwise uncharged object.
Using Model 156A to periodically test the balance and attenuation time of ion fan, it is easy to determine the maintenance needs and frequency of ion fan.
Product Function
Monitor voltage range: 0 to ±1100 V DC or peak AC
Small signal bandwidth (-3 dB): DC to 1 kHz (measured at 20V p-p)
Large signal bandwidth: DC to 10 Hz (measured at 2000 V p-p)
Zero point stability (refer to plate voltage)
Time drift: Less than 6V/ min
Temperature drift: Less than 10mV/℃
Decline mode threshold:
Starting voltage: 1 to ±1000 V, step by step 1 V, edited by software
Starting voltage: Within ±1V of the starting voltage
Stop voltage: 0 to ±999 V, step by step 1 V, edited by software
Stop accuracy: Within ±1V of the starting voltage
Self-discharge of flat panel: Less than 12V/ min
Product Attribute
Voltage monitoring output:
Use BNC interface to provide low voltage output of flat panel voltage
Ratio: 1/200 of the flat panel voltage
Dc accuracy: Less than 0.1% of full scale
Compensation voltage: Less than ±10mV
Output noise: Less than 10mV rms
Output impedance: Less than 0.1Ω
Panel voltage digital panel meter:
3-bit semi-digital LED display
Scope: 0 to ±1100 V
Resolution: 1 V
Accuracy: Less than 0.1% of full scale
Decline time digital tablet table:
4-digit digital LED display
Range: 0 to 9999 seconds
Resolution:
0.1 s from 0.1 to 999.9s
1 s from 1000 to 9999s
Ion collecting plate size: 15cmx15cm
Capacitance: 20pF±2pF
Product Standard
Power requirements:
Battery generator/charger
Output connector:
2.1mm DC power plug
Output voltage: 12 to 14V DC
Output current: 1A
Battery operation: Rechargeable battery
Operation time: It can be used for 8 hours when the battery is fully charged
Charging time: 3 hours full
Others: Low battery display/full battery display
Operating conditions:
Temperature: 5℃ to 35℃
Relative humidity: Up to 80%, without condensation
Instrument size:
83 mm H x 318 mm W x 280 mmD
Mass: About 2kg
Ordering Information of Model 156A and 156A/1
Commodity Name Model
Charging flat panel tester 156A
Charging flat panel tester includes communication serial port 156A/1
Metal Plate:
15cm×15cm (6"×6 ") plate 17397
25mm×25mm (1"×1") plate 17375
Special metal plate (optional)
The size of the metal plate can be customized
Accessories
Commodity Name Model
Operation manual 23126
PC compatible computer software (only 156A/1) 43267
Folding line of banana head N9044
Optional Accessories
Replace battery/charger (115V AC) L5111
Universal power adapter kit (100~240V AC) 1K010
Metal plate bracket Dk142
Suitcase 43433