ST103ABStainless Steel Suspended Three-Head AC Ion Fan
Product features:
1. Adopt high-speed wind energy to remove electricity widely
2. With automatic adjustment of ion balance circuit, the ion balance can reach ±10V
3. The electrostatic needle can be simply cleaned by electrode dry scrubbing
4. Stainless steel can significantly prolong the service life of equipment
5. Stainless steel fan has stronger corrosion resistance and is more suitable for acid and alkali
Environment
6. Heating network device can be added (optional)
Application Area
1. Liquid crystal module process
2. Manufacturing process of liquid crystal glass
3. Substrate mounting process
4. Substrate test procedure
5. Processor inspection procedure
6. Electrostatic protection of dust and dust before coating of formed products
Technical Parameter
Input voltage | AC110v~220V 50/60HZ |
Capacity | 46VA |
Output voltage | 5.6KV |
Ionic equilibrium | Below ±10V (when leaving the factory) |
Static removal time | 1.5 seconds or less (distance 300mm, maximum air volume: when leaving the factory) |
Air quantity | 1.4~3.2m3/min X3fan |
Wind speed | 0.8~1.0m/s (300mm from the center) |
Ozone generation | Under 0.006ppm (distance 150mm) |
Work environment | Ambient temperature: 0~40℃, ambient humidity: 15~85%RH (no condensation) |
Filter device | Pre-filter stage |
Output signal | Without |
Main body size | 600mm(L)×170mm(W)×125mm(H) (including bracket) |
Weight | 4.85kg |
Noise | 66dB(A) (distance 1m) |
Sheathing material | Iron |
Attached belonging products | Operating instructions, test reports, certificates and warranty cards |
Accessory part | Straight vent window AC001A, needle holder AC002A, iron mesh cover AC003A, governor AC004A, fan ACO05A and replacement filter ACO06A |